Ibiza Light MHBEAM40-FX Manual De Instrucciones página 4

11ch
32ch
11CH: 13Channel mode
32CH: 21Channel mode
MAST: Choose the device as master
SL1: Choose the device as slave
Press MENU to select ShNd. Press Enter to start setting. Sh X will be displayed, X representing a
number between 1-4. Select a show via the UP and DOWN buttons. Press ENTER to confirm your
choice. Keep the MENU button pressed for at least 3 seconds to activate the show.
AutO
1. Press the MENU button until "Auto" is displayed, press ENTER.
2. The Display will show either "Au 1" - "Au 4". Press the UP or DOWN buttons to find your desired
show, and "SP 0" - "SP 9" to choose the effect speed.
led
With this function the display back light will turn off after 2 minutes.
1. Press the MENU button until "Led" is displayed, press ENTER.
2. The display will show either "ON" or "OFF". Press the UP or DOWN buttons to select "ON" to keep the LED
display on at all times, or "OFF" to switch to have the LED display switch off after 2 minutes.
3. Press ENTER and then press and hold the MENU button for at least three seconds to confirm.
ver
Ver – Check the device version
4
MANUAL - MHBEAM40-FX
DMX Address Mode
Setting of the DMX address: Press MENU to select Addr, press Enter to start setting.
Use the UP or DOWN keys to set the desired Address. Then press Enter to confirm.
DMX Channel Mode
Selection of the channel mode: Press MENU to select Chnd. Press Enter to start setting
Select the channel mode via the UP or DOWN keys: successively 11CH and 32CH. Press
Enter again to confirm your selection.
Master/Slave Mode
Setting the Master-slave mode: Press MENU to select SLnd. Then press Enter to start
setting. MAST, SL1, SL2 or d512 will be displayed. Press UP or DOWN to choose Master
or slave, then press Enter again to confirm your selection.
Show modes 1-4 (Factory programs). Show mode can run with sound active mode
Auto – Auto running effect
Sound Sensitivity
Adjustment of sound sensitivity: Press MENU, select SEns and press Enter to start set-
ting. Use the UP and Down keys to adjust the sound sensitivity from 0-100. Press Enter
to confirm your choice.
Led
Display Reverse by 180°
This option allows the user to reverse the direction of the display panel. Press MENU,
select dISP. press Enter to start the setting. Use the UP and Down keys to select dSIP
and it will reverse directions. Press Enter to confirm your choice.
Pan Reverse
This option is set to reverse the Pan direction. Press MENU, select Pan, press Enter to
start setting, UP and Down to select no or Yes, then press Enter to confirm your choose
Tilt Reverse
This option allows the user to reverse the Tilt 1 direction: Press MENU, select tiLt, press
Enter to start the setting. Use the UP and Down keys to select no or Yes, then press
Enter to confirm your choice.