Publicidad
Start up with a hot motor
• Set the brushcutter on level ground where the blade or
spool will not make contact with any obstacle.
• Set the switch into the ON position (A).
• Press simultaneously the trigger release (D) and the
throttle trigger (E).Keep the trigger depressed.
• Pull the starter handle (G) to start the motor.
• Press and release the throttle trigger to set the motor
idle (K).
Turning off
• Press and hold the switch into the OFF position (E) until
the motor stops.
E
CAUTION
• Remember, you as the brushcutter
operator is responsible of your own safety as well as
people close to the work area. Follow all safety warnings
(pages 4 and 5) before operating the brushcutter.
• Keep a balanced stance with both feet firmly set onto the
ground.
• Hold the brushcutter firmly in front of you; one hand
holds the handle and the other holds the auxiliary handle
so that the brushcutter is aligned to your body and
pointing the cutter head 30° downwards, away from your
feet.
DANGER
• Do not start the brushcutter in a
different position.
• Turn ON the brushcutter and cut from left to right
rotating your waist and keeping the brushcutter position.
• As the cut is performed, the cutting line wears out and
will be detached. To release more line from the spool,
press the brushcutter slightly downwards. The ground will
depress the retention cap against the spool and will release
more line. The guard blade will cut the remaining line.
Then, stop pushing the brushcutter against the ground to
save line lengths.
• To cut brush or grass, cut gradually. Do not try to cut in
one movement from the base because the residues may
clog the cutting head or can go out of control from the
operator.
10
ENGLISH
Turning on
A
E
D
F
G
K
Operation
30°
B
x10
Waist
Rotation
Cutting
movement
Publicidad
