Publicidad
Technical data
Description
Net weight
Motor rated power
Fuel tank
Cutting capacity
Axis length
Cutting systems
Blade diameter
Nylon line diameter
Type of handle
Work cycle
Fuel specifications
• The brushcutter has an air-cooled 2-cycle motor using a mix of unleaded gasoline and high quality self-propulsion
oil for air-cooled two-cycle motors.
• The motor is certified to run with unleaded gasoline for vehicles with 87 or more ([R+M]) octane level.
• Do not use any type of gasoline premixed with oil bought in service stations such as gasoline for motorcycles.
• Do not use automotive oil or oil for 2-cycle outboard motors oil.
• The mix ratio should be 50 parts gasoline per 1 part oil (50:1 ratio). Prepare the mix in a gasoline-approved
container. Always mix thoroughly before pouring in the motor tank.
Do not use fuel mix stored longer than 15 days. Make small amounts of mix.
CAUTION
Never smoke near fuel, the gasoline filling up area or where the oil mix is being prepared or when
WARNING
operating the tool.
Any attempt to start the brushcutter with no oil added to the fuel mix will damage to the
WARNING
brushcutter.
Use
1
L
1 liter
Gasoline
To prolong the useful life of the motor use
DES-430
Code
Motor
Speed
ACES-2, ACES-5 or ACES-20 oil caps** to measure the mix.
Mix 4 capfuls oil per each gasoline liter.
A wrong mix may cause the motor to throw a rod causing
expensive repairs!
+
4 capfuls oil
11031
Gas brushcutter
20.2 lb
43 cc
1.7 Hp
0.3 gal
9 000 RPM
18"
5.2 ft
Nylon line spool and blade
Outer: 10" Inner: 1"
From 0.09" to 0.14" (recommended)
"Bicycle" type
20 minutes rest per each tank consumed.
Maximum 6 hours daily.
=
two-cycle synthetic motor oil.
* 1 gallon = 3.78 liter
DES-520
11032
52 cc
2 Hp
ratio
50:1
Mix
** Not included
ENGLISH
3
Publicidad
