Burley Bee Instrucciones Del Propietario página 9

Opening Your Trailer
1
Lift front frame at rear.
cHEcK tHAt tHE FrAME LAtcHES ArE ProPErLY EnGAGEd BEForE uSInG trAILEr.
Closing Your Trailer
1
remove passengers and
cargo, and then remove the
tow bar and both wheels.
4.
cArE MuSt BE tAKEn WHEn FoLdInG And unFoLdInG to PrEVEnt FInGEr EntrAPMEnt.
BEE
2
raise the rear frame tube until the tubes
sit together on the plastic saddles.
WARNING
2
From the rear of the trailer, lift the
cover and then lift the yellow latches
and push the rear frame forward.
WARNING
ENG
3
Lock bars together by pushing
down on the yellow latches.
3
Push the rear frame at the
lower bend to fold flat.
note
damage to windows can occur if
trailer is folded with wheels installed.
DEU FRA ESP
Installing the Wheel Guards
1
Insert the the wheel guard into the reciever. Slide the
wheel guard back until you hear it click into place.
Attaching & Removing
the Wheels
1
While pressing rubber For removing wheel:
button, insert wheel axle while pressing button,
into axle receiver, and slide wheel out of the axle
then release the button. receiver. release button.
Pull firmly on wheel to
confirm the axle is fully
engaged.
ASSEMBLY & uSE
2
9