gala gar SMART 210 TIG PULSE Manual Técnico De Instrucciones página 33

SMART 210 TIG PULSE
5.1.4. Operation
DC TIG:
Select DC TIG mode by pressing the welding mode selecting key, and select 2T mode by pressing the operation
mode selecting key.
Select pre-flow time setting function by pressing the welding parameter selecting key, and set the pre-flow time.
Select upslope time setting function by pressing the welding parameter selecting key, and set the upslope time.
Select welding current setting function by pressing the welding parameter selecting key, and set the welding current.
Select downslope time setting function by pressing the welding parameter selecting key, and set the downslope time.
33/86
Gala Gar, S.L. c/ Jaime Ferrán, 19 (Políg. Cogullada) | Tel.: (+34) 976 47 34 10 - 50014 ZARAGOZA | www.galagar.com