Sears Kenmore 385.19030 Manual De Instrucciones página 40

SECTION III BASIC SEWING
Straight Stitching
(_ Selected stitch
(_ A: Zigzag foot
(._ H: Straigh stitch foot
• Starting to Sew
Raise the presser foot and position the fabric next to
a seam guide line on the needle plate (see page 42),,
Lower the needle to the point where you want to
starL Lower the presser foot and pull the threads
toward the back. Depress the foot control. Gently
guide the fabric along a seam guide line letting the
fabric feed naturally.
Note:
When using the straight stitch foot, make sure to
use center needle position.
Otherwise the needle will strike the sewing foot
and possibly break°
e Finishing Sewing
To fasten the ends of seams, press the reverse
button and sew several reverse stitches..
Raise the presser foot. Remove the fabric, draw the
threads to the back and cut using the thread cutter,
The threads are cut the proper length for starting the
next seam.
O2
- When pattern I is selected, reverse stitches
are sewn automatically at the beginning of the
seam, then continue sewing forward.
- When you reach the end edge of the fabric,
press the reverse button once.,
The machine wil! sew four reverse stitches, four
forward stitches then stop sewing.
(_ Reverse button
(_) Thread cutter
(_) Fabric
\
f
32