MUHLER MV-80N Manual De Uso página 3

EN: VACUUM SEALER | Instruction Manual
12. It is not toy, the device should keep away from children.
13. This appliance is not intended to be used by persons (including
children) with reduced physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible
for their safety. Cleaning and user maintenance shall not be made by
children.
14. Don't touch the heat sealer on the machine to avoid being burned.
15. Any lubricant, such as oil or water, is not needed for this machine.
16. After each use, you' d better wait for 30 seconds to allow appliance to
cool down.
"Keten" Ltd. is not liable for damages caused by non-compliance with these instructions, improper use or manipulation
DESCRIPTION OF THE APPLIANCE
4
EN: VACUUM SEALER | Instruction Manual
1. Vacuum Seal Button: State of sucking the air, the green light is flashing. State of sealing the bag, the red light is on.
Short press It could achieve vacuum and seal function. (Better to wait for 30 seconds, when you use it again)
Long press Press the button at least 1.5 seconds, vacuum and seal thicker bag such as tea bag, foil bag, paper poly pouch
(Better to wait for 30 seconds, when you use it again)
Keep the cover open, then press Vacuum Seal Button, The two flashing indicator light means that it is in the „Canister"
process. It is for the device vacuum packing canister or container.
2. Seal Button: During Sealing, the red light is on.
Short Press Press to seal the bag (Better to wait for 30 seconds, before you use it again)
Long Press Press Seal Button at least 1.5 seconds to seal thicker bag such as tea bag, foil bag, paper poly pouch (Better to wait
for 30 seconds, before you use it again)
You can press any button to stop the device from working
3. Inlet port. When vacuum pack canister or container, you should put the end of vacuum hose to mantle the inlet port.
4. NTC intelligent temperature control When the temperature of the heating wire exceeds the pre-set safe temperature,
the machine automatically enters the safety protection mode, the red and green lights flash alternately and the buttons
are disabled. Please unplug the power cord, let the machine cool down for 2 minutes. Then plug in the power cord, the
machine returns to normal operation automatically.
TECHNICAL CHARACTERISTICS
Model: Power Voltage Vacuum degree
MV-80N 100W 220-240V~, 50/60Hz 60 Kpa
Size Weight Size limit
355x82x65 mm 0.57 kg 290 mm
5