VMI CUBE Manual página 84

3.
Access the SETTINGS menu by pressing the button on the control unit twice (press and
•
release twice) and then by pressing the button again and holding for 3 seconds (press
and hold).
Select the filter pictogram using the selector.
•
Confirm by holding the button in for 3 seconds (press and hold).
•
The filter pictogram will flash, press the button to confirm the operation.
•
SETTING
Turn the electrical preheating back on if necessary
•
B. Changing the batteries in the control unit
This operation can be carried out by the user. The control unit contains 3 AA batteries. Battery
replacement:
You need 3 new LR6/AA batteries.
•
Use your thumbs to slide the cover open.
•
Remove the dead batteries.
•
Insert the new batteries.
•
Close the cover by sliding it in the opposite direction.
•
The batteries must not be thrown away with household rubbish. To
dispose of them in compliance with local standards, take them to your
local collection point or return them to your retailer or manufacturer.
C. Air inlets and outlets
This operation can be carried out by the user.
Confirming the filter change via the control unit
Turn
the dial
SELECT
THE FILTER
PICTOGRAM
Turn
the button
for 3 seconds
84