Target group for this instruction manual
A
NOTICE!
• Only use the device as intended.
• The roof air conditioner is not suitable for use in agricultural or con-
struction vehicles.
• Do not make any alterations or conversions to the device.
• Never drive through automatic car washes when the roof air condi-
tioner is mounted.
• If faults occur in thes refrigerant circuit, the system must be checked by
a specialist company and repaired properly. The refrigerant must
never be released into the air.
I
NOTE
• Please ask your vehicle manufacturer if a technical inspection is
required after fitting an air conditioner and whether the height entered
in the vehicle documents needs to be altered (increased height
245 mm).
2.2
Handling electrical cables
!
WARNING!
• The electrical power supply may only be connected by a qualified
electrician (e.g. VDE 0100, Part 721 in Germany).
!
CAUTION!
• Fit a fuse of at least 10 amps to the connection with the vehicle's power
supply.
• Attach and lay the cables so that they cannot be tripped over or dam-
aged.
A
NOTICE!
• Use cable ducts to lay cables through walls with sharp edges.
• Do not lay loose or bent cables next to electrically conductive materi-
als (metal).
• Do not pull on the cables.
3
Target group for this instruction manual
The instructions in this manual are intended for qualified personnel at workshops
who are familiar with the guidelines and safety precautions to be applied.
6
B3200
EN