Descaling indicator
If the descaling indicator illuminates, it indicates the steam generator shall be cleaned by
virtue of the mineral deposits collecting to a degree. When the system ensures the mineral
deposits have been removed, the indicator will extinguish.
Power cord storage box & Steam supply hose storage box
When not in use, the steam supply hose and power cord can be folded well and stored in
their respective storage boxes.
Automatic power off
The appliance will turn off automatically if do not activate the "Steam" function or do not
activate the control buttons on the control panel within 10 minutes.
BEFORE FIRST USE
1. Remove any sticker or protective foil from the soleplate.
2. Fill the water tank with water and heat up the iron at the maximum temperature, and then
iron over a piece of damp cloth for several minutes for the purpose of removing any residue
on the soleplate according to the section of "Steam ironing".
NOTE:
1
It is normal that strange odour comes out from the unit for the first use. This will
)
cease after a short while.
2) Some particles may come out of the soleplate when you use the iron for the first
time. This is normal; the particles are harmless and stop coming out of the iron after a
short while.
3) When you activate the "Steam" function, the appliance may produce a pumping
sound. This is normal; the sound tells you that water is pumped into the steam
generator.
4
During the heating process of the soleplate, there will be little steam coming out
)
from the soleplate automatically and this phenomenon will continue for about 3
seconds, this is normal.
5
There will be little condensation water in the steam supply hose after first use.
)