Glacier bay HD67688W-6001 Instrucciones De Montaje página 12

Operation (continued)
2
Operating the sensor
NOTE: The handle only controls the water temperature.
Turn the water on and off with the keep of your hand.
□
Turn the water on by activating the sensor (1)
by keeping your hand within 4 inches of the
sensor. When removing your hand from within
4 inches of the sensor, the water will turn off.
□
Rotating the handle towards right will turn
the water to cold. Rotating the handle
towards left will turn the water to hot.
□
If you are having trouble with the sensor,
please refer to the troubleshooting section.
NOTE: As a water saving feature, the water will turn off
automatically after 1 minute of continuous flow.
3
Removing the quick connector
(not required)
□
If it is necessary to remove the quick connector
(1), squeeze the tabs (2) on the quick connector
and then pull down to disconnect.
Care and Cleaning
□
To clean, wipe down with a damp cloth and dry with a towel.
□
Do not use abrasive cleaners, steel wool, or harsh chemicals when cleaning this faucet, or the warranty will
be voided.
0
1
min.
45
15
30
1
Squeeze
1
12
Hot Cold
2
Pull
down
1