Publicidad
Idiomas disponibles
Idiomas disponibles
Reverse osmosis units for the desalination of tap water. Daily capacity: up to 600 litres, depending
on the type.
With this unit, you can remove the inorganic and organic substances, dissolved in your tap water, to a percentage
of up to 98% (nitrate and silicate approx. 70%) without adding any chemicals.
1. Product description
The reverse osmosis units of the Premium Line series for desalinating tap water with a capacity of approx. 75 -
600 litres (depending on the type and water pressure) per day consist of the following parts:
-
Sediment prefilter, 10" with 5 µm pore size (Fig. 2, No. 6/10)
-
Activated carbon filter (Fig. 2, No. 7/11)
-
One or two reverse osmosis modules (depending on the type) with a first class synthetic membrane
(polyamide/polysulfone) which has a capacity of 75 - 190 / 120 - 300 / 240 – 600 litres (two membranes
with a capacity
of
120 – 300
-
Flush valve: at this valve (3), the permeate/concentrate ratio is adjusted to 1:3 - 1:4 (3)
-
Tap water connection fitting (3/4") with 3 m pressure tube
The daily output depends on the water pressure and temperature.
Table:
The pure water output of Aqua Medic reverse osmosis membranes depends on the pure water
pressure in front of the membrane and the water temperature. The values are average values, not
specifications.
Temperature
Pressure
3 bar
4 bar
5 bar
6 bar
2. Set-Up
The system is delivered ready-to-use on a mounting unit. Fix it directly on the wall – preferably, near a water
tap.
Attention: Before first usage, please remove the protection foil from the membrane and prefilters!
Now, you can connect the tubes. To avoid any failures, follow the instructions carefully:
6
Operation manual ENG
l/
day
)
(5)
Output l/day
°C
Type 190
5°
46
10°
55
15°
64
20°
76
25°
88
5°
61
10°
73
15°
86
20°
101
25°
118
5°
76
10°
91
15°
107
20°
126
25°
147
5°
93
10°
111
15°
132
20°
160
25°
189
Output l/day
Typ 300
79
94
110
130
151
105
125
147
173
201
131
156
184
216
252
157
221
267
267
302
Publicidad
