Echo SRM-3610T Manual De Instrucciones página 28

Idiomas disponibles

Maintenance and care

When the line is wound to the end hook both line ends into

respective notch of spool for retaining tentatively the line

while leaving line ends approximately 10 cm beyond notch.

Align notches of spool for the line with grooves of eyelets

and fit spool into cover.

Pull out the line from cover. (A) Remove the line from "re-

spective notch of spool", and (B) pass it through "groove of

respective eyelet".

Fit cover and housing together. (C) Align "eyelets" of cover

with "recesses" of housing, and (D) press pawls of housing

into respective window of cover until the pawls are firmly fit-

ted into the windows.

Make sure each outer periphery of pawls of housing

spreads almost fully up to the outer periphery of respec-

tive window of cover. If they are loosely fitted and the cut-

ting head is turned, cover or inside components can fly off

which is dangerous.

DANGER