LG DLHC1455V Manual Del Propietário página 44

44 TROUBLESHOOTING
Before Calling for Service
The dryer is equipped with an automatic error-monitoring system to detect and diagnose problems at an
early stage. If the dryer does not function properly or does not function at all, check the following before
you call for service.
Error Messages
Problem
dE
DOOR ERROR
dE4
DOOR ERROR
/
tE1 tEz
TEMPERATURE
ERROR
FI
TEMPERATURE
ERROR
LE1
MOTOR LOCKED
ERROR
/
LEz AE
COMPRESSOR ERROR
OE
DRAIN PUMP ERROR
Ps
POWER SUPPLY
ERROR
Operation
Problem
The appliance will
not turn on.
The door has been opened while the appliance is in operation or the appliance is being
operated without the door being closed properly.
• Close the door completely.
• If recurs, call for service.
dE
Door switch detection is not working properly.
• Unplug the power plug and call for service.
Temperature Sensor has malfunctioned.
• Unplug the power plug and call for service.
The temperature inside the drum has risen suddenly.
• Unplug the power plug and call for service.
The motor has stopped suddenly.
• Check if the amount of clothing exceeds the maximum load capacity.
• Unplug the power plug and call for service.
The compressor has stopped suddenly.
• Unplug the power plug and call for service.
The drain pump motor has malfunctioned.
• Unplug the power plug and call for service.
The temperature at the installation location is below zero.
• The recommended surrounding temperature for installation is 41 - 95 ℉ (5 - 35 ℃).
Power cord is connected incorrectly.
• Check the connection of the power cord to the terminal block.
Power cord is not properly plugged in.
• Make sure that the power plug is securely plugged into a grounded outlet matching the
appliance's rating plate.
House fuse is blown, circuit breaker has tripped, or power outage has occurred.
• Reset circuit breaker or replace fuse. Do not increase fuse capacity. If the problem is a
circuit overload, have it corrected by a qualified electrician.
Possible Cause & Solution
Possible Cause & Solution