Publicidad
Step 15
Carefully stand your unit upright.
å
Before fastening the DOOR to your unit, be sure the
å
mounting screw is against the stops as shown in the right
diagram. If it isn't, loosen the mounting screw to slide it
against the stops. Then tighten the mounting screw.
Fasten a DOOR (I) to the RIGHT END (A). Use the screws
å
provided in the HINGES. See the next step for adjustments.
Fasten a KNOB (17K) and BACKPLATE (18K) to the DOOR (I).
å
Use a BLACK 1-1/8" MACHINE SCREW (21S).
Peel the FELT DISC from the FELT DISC CARD (1M). Stick a
å
FELT DISC on the DOOR where it comes in contact with the
RIGHT UPRIGHT (C).
Repeat this step for the other DOOR (I).
å
Page 20
A
C
BLACK 1-1/8" MACHINE SCREW
(2 used in this step)
409048
Pro Tip: Lift with your
legs. And, you know,
your arms.
Stop
Mounting
screw
Hinge
1M
17K
I
18K
21S
www.sauder.com/services
Publicidad
