Publicidad
Step 4
First, fi ll the holes in the STOP MOLDING (XX) 1/4 to 1/2 full
å
with GLUE (54M). Then, insert fi ve WOOD DOWELS (15F)
into the holes. Wipe away the excess GLUE.
Now, fi ll the holes in the edge of the TOP (E2) 1/4 to 1/2 full
å
with GLUE.
Fasten the TOP (E2) to the STOP MOLDING (XX). Tighten
å
four HIDDEN CAMS.
NOTE: Be sure the WOOD DOWELS in the STOP MOLDING
å
insert into the holes in the edge of the TOP. Wipe away the
excess GLUE.
(5 used)
15F
1
www.sauder.com/services
XX
Seam
E2
2
409048
Fill the holes 1/4 to 1/2 full with GLUE.
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
54M
Page 9
Publicidad
