Publicidad
Idiomas disponibles
Idiomas disponibles
SWITCHING OFF THE COOKING AREA
1.
The requested cooking zone must be activated and will, therefore,
be brighter.
2.
Return the setting to "0" by means of the key
RAPID SHUTDOWN OF THE COOKING AREA
1. Select the cooking zone to turn o .
2. Press and hold
and
RESIDUAL HEAT INDICATOR "H"
If the temperature of the cooking area is still high (and a burn risk still
present) after it has been switched o , the display (3) for the area will
indicate the letter "H" (residual heat).
The letter will only switch o when the burn risk is no longer present
(approximately 60°C).
SWITCHING OFF THE HOB
The hob can be switched o at any time by means of the ON/OFF switch
(1).
FUNCTIONS
LOCKING THE COOKING SURFACE
The entire hob can be locked with a combination of keys. Turn on the
cooking surface and then press
select key on the left (2). L's appear. The purpose of this lock is to prevent
unintended operations.
While the lock is engaged, all operation of the keys is disabled, with the
exception of the OFF key (1). To unlock the hob, perform the same
operation: turn on the surface, press the minus key (4) and press the
selection key to the left (2). The L's disappear.
SAFETY SHUTDOWN
In the event that one or more cooking areas is inadvertently left on, the
safety system will shut the zones down automatically after a certain
time has elapsed, after which the letter "H" or "h" will be displayed.
(Tab.2)
COOKING LEVEL
OPERATING TIME H
0
1
2
3
4
5
6
7
8
9
Tab. 2
(4).
(4,5).
key (4) and, holding it down, press the
0
10
5
5
4
3
2
2
2
1
DOUBLE CIRCUIT COOKING ZONE
One zone has a second circuit. The oval cooking zone: consisting of
a central disc and an external crown gear on the external axis.
TURNING ON A DOUBLE CIRCUIT ZONE
After entering a value that is greater or equal to 1, the double circuit area
is enabled by pressing the cooking zone key (2) again. Only for this type
of heating plate with double circuits, horizontal dashes light up to
indicate how many circuits are turned on for that plate, 2 horizontal
dashes (8) indicate that 2 resistors are active.
TURNING OFF A DOUBLE CIRCUIT COOKING ZONE
1.
The zone must be activated and, therefore, brighter.
2.
When you touch the selection key of the zone involved again, one
circuit at a time is turned o . When you continue to press the
selection key intermittently, they are turned on and o at will (only
for double plates).
TIMER FUNCTION
This function also simpli es operation by not requiring human
supervision during the cooking cycle. Once the set time on the timer has
elapsed, the cooking area is automatically switched o .
USING THE TIMER FUNCTION
1.
The cooking zone must be activated, therefore, brighter.
2.
Select a power level between 1 and 9.
3.
Touch the timer key (6): the timer display shows "00" and the
cooking zone decimal point is highlighted (10).
4.
Select the cooking time (between 0 to 99 minutes) by means of
the
and
keys.
The timer function will automatically start within a few seconds and
a ashing "t" will appear on the zone with the shortest timer setting.
The decimal point (10) of the cooking zone with timer setting remains
highlighted on the zone with the shortest timer setting.
The timer will start up automatically in a few seconds. Press and hold
down the
or
keys to scroll the time setting. The timer function can
apply to all the cooking zones by selecting them.
RAPID SHUTDOWN OF THE COOKING AREA AND RELATIVE TIMER
Select the cooking zone and then, press the key
timer function will also be deactivated.
TURNING THE TIMER OFF
When the set time has elapsed, an acoustic signal is emitted for
two minutes.
To silence the signal press any key.
To interrupt the timer proceed as follows:
1.
Press the timer key (6)
2.
Press the
(4) key to reset the time
– 10 –
and
. Note that the
Publicidad
