Descargar Imprimir esta página

Franke FRSM 704 C TOD BK Manual De Instalación Y Servicio página 9

Ocultar thumbs Ver también para FRSM 704 C TOD BK:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 38
CONTROL PANEL
2
3
2
11
CONTROLS
The cooking hob is controlled by an electronic microprocessor.
The control software detects both control and the presence of any
abnormal operating conditions, such as:
-
the spilling of liquids or presence of other objects on the control
panel;
-
the presence of condensate inside the hob.
In the event of any of the above conditons, the system sets to safety
alarm status: the powered on plates are immediately turned o and an
error code is displayed.
Standard operation is resumed once the cause of the alarm condition
has been removed. If operation is not restored, it may be necessary to
disconnect the mains power and reconnect it.
DAILY USE
SWITCHING ON THE DEVICE
1.
Press
the
key
the adjustment-level indicators (3) show "0" and a power-on LED
appears under the 1 key.
2.
Perform the next operation within 10 seconds, otherwise the
device will switch o automatically.
ADJUSTING POWER AND THE TIMER BY MEANS OF THE
KEYS
Use the
and
keys (4, 5) to adjust the setting of the plates and the
required time on timer/minute counter (7). The
common to both functions. Accordingly, to regulate the power of the
hob, rst select the zone with key (2), then adjust the relative power level
using the
and
keys (4, 5); this done, select the timer function with
key (6) and proceed to set the duration, likewise using the
(4, 5).
9
1
7
6
4
8
5
12
(1)
to
activate
the
and
3
10
2
2
TOUCH KEYS
All operations can be performed using the touchkeys (capacitive
sensors) located on the front face of the card; each key corresponds to
a display.
Each activity is con rmed by a beep.
SWITCHING ON THE COOKING AREA
control:
Once the device has been activated, switch on the cooking area (within
10 seconds) as follows:
1.
Press one of the keys (2) to select the cooking area required.
The related display is brighter.
2.
Use the
Press and hold down these keys to increase or decrease the setting
AND
(Tab. 1).
TOUCH CONTROL
keys (4, 5) are
2-3
or
key
5-6
7-8
Tab.1
– 9 –
1.
power ON/ Power OFF
2.
cooking zone
3.
power display
4.
minus
5.
plus
6.
timer
7.
display timer
8.
dual circuit led
9.
power on led
10. decimal point
11. lock key
12. timer decimal point
and
keys (4, 5) to adjust the heat level (from 1 to 9).
HEAT INTENSITY
1
weak
gentle
4
slow
medium
strong
9
very strong
EN

Publicidad

loading