Beha-Amprobe AM-535-EUR Manual De Uso página 10

FEATURES
AM-535-EUR is the fully-featured multimeter of choice for the professional
electrical contractor. Measure and verify presence of voltage in order to
connect equipment or to perform repairs, run new wiring, check continuity
of electrical connections, identify blown fuses, troubleshoot motors or check
transformers. The AM-535-EUR features Truerms sensing to accurately measure
voltage on systems affected by harmonics, a built in flashlight to detect wire
colors in the dark, a "third hand" probe holder and non-contact voltage
detection. Safety rated to CAT III 600V.
• Measurements: Voltage up to 600VAC and 600VDC, AC/DC current,
Resistance, Frequency, Capacitance, Temperature.
• Frequency, Capacitance, Duty Cycle for troubleshooting applications
• Special Functions:
- Non-contact Voltage Detection
- Audible continuity
- Diode Test
• Backlight LC Display with analog bar graph
• Events:
- Data hold
- MAX / MIN Memory
- Relative zero mode
• Built in work light (flashlight)
• Built in test leads storage and "third hand holder"
• Auto and Manual ranging
• Auto power off
• Low battery warning
• Velcro strap to hang a meter
• Safety: CAT III 600V
MAKING MEASUREMENT
X�
1. Use the proper function and range for measurements.
2. To avoid possible electrical shock, personal injury or damages to the
Meter, disconnect circuit power and discharge all high-voltage capacitors
before testing resistance and diode.
4