Beha-Amprobe AM-535-EUR Manual De Uso página 11

3. Connecting test leads:
• Connect the common (COM) test lead to the circuit before connecting
the live lead
• After measurement, remove live lead before removing the common
(COM) test lead from the circuit
4. Symbol "OL" is displayed on LCD when the measurement is out of range.
Rotary Switch Positions
Switch Position
V
e
G
E
Hz
°C °F
NCV
μA mA A
Function Buttons
Button
SELECT
HOLD /
REL
RANGE
MAX/MIN
Press to enable the function when at relevant rotary switch function.
AC or DC voltage measurement (use SELECT button for
switching to AC or DC).
Resistance measurement
Voltage measurement of diode PN junction
Continuity measurement
Capacitance measurement
Frequency measurement
Temperature measurement
Non-contact voltage
AC or DC current measurement (use SELECT button for
switching to AC or DC).
Switching AC or DC. Press the yellow SELECT button to select
alternate measurement functions on the rotary switch.
Display freezes present reading / press 2 sec to turn on
LCD backlight.
Relative zero mode
Manual or Auto range switching. The default setting
is Auto ranging, press to switch to manual ranging
(selectable resolutions). Press for 2 sec to return to auto
ranging.
Maximum / minimum reading memory.
Flash light
Measurement Function
Measurement Function
5