Descargar Imprimir esta página

Ryobi RY18BLXC Manual De Instrucciones página 5

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 15
ADDITIONAL BATTERY SAFETY
WARNINGS
To reduce the risk of fi re, personal injury, and
product damage due to a short circuit, never
immerse the tool, battery pack or charger in
fl uid or allow fl uid to fl ow inside them. Corrosive
or conductive fl uids, such as seawater, certain
industrial chemicals, and bleach or bleach-
containing products, etc., can cause a short circuit.
TRANSPORTATION AND STORAGE
Turn off the product, remove the battery
pack, and allow it to cool down before
storing or transporting.
Remove all foreign materials from the
product. Store the product in a cool, dry, and
well-ventilated place that is inaccessible
to children. Keep the product away from
corrosive agents, such as garden chemicals
and de-icing salts. Do not store the product
outdoors.
For transportation in a vehicle, secure the
product against movement or falling to
prevent injury to persons or damage to the
product.
TRANSPORTING LITHIUM BATTERIES
Transport the battery pack in accordance with
local and national provisions and regulations.
Follow all special requirements on packaging
and labelling when transporting batteries by a
third party. Ensure that no batteries can come
in contact with other batteries or conductive
materials while in transport by protecting
exposed connectors with insulating, non-
conductive caps or tape. Do not transport
battery packs that are cracked or leaking. Check
with the forwarding company for further advice.
MAINTENANCE
Use only original manufacturer's replacement
parts, accessories, and attachments. Failure to
do so can cause possible injury, can contribute
to poor performance, and may void your
warranty.
Servicing
requires
knowledge and should be performed only by a
qualifi ed service technician. Have the product
serviced by an authorised service centre only.
extreme
care
and
Check all nuts, bolts, and screws at frequent
intervals for proper tightness to ensure that
the product is in safe working condition. Any
part that is damaged should be properly
repaired or replaced by an authorised
service centre.
Bring the product to an authorised service
centre to replace damaged or unreadable
labels.
You may make adjustments or repairs that
are described in this manual. For other
repairs, contact an authorised service
centre.
After each use, clean the product with a
soft, dry cloth.
CLEARING A BLOCKAGE
To reduce the risk of injury associated with
contacting moving parts, always turn off
the product, remove the battery pack, and
make sure that all moving parts have come
to a complete stop.
Remove the blower tubes to inspect for
blockage. Clear the tubes if required.
Reinstall the blower tubes before starting
the product.
KNOW YOUR PRODUCT
See page 104.
1.
Blower tube
2.
Blower tube latch
3.
Variable speed trigger
4.
Handle
5.
Operator's manual
6.
Battery pack
7.
Charger
SYMBOLS ON THE PRODUCT
Read and understand
all instructions before
operating the product. Follow
all warnings and safety
instructions.
Beware of thrown or fl ying
objects. Keep all bystanders,
especially children, and pets,
at least 15 m away from the
operating area.
Rotating fans. Keep hands and
feet out of openings while the
product is running.
5
Original Instructions
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR

Publicidad

loading

Este manual también es adecuado para:

Ry18blxc-0Ry18blxc-1405133005355