would like to cancel the snooze function ahead of time, press the menu button for approx.
two seconds until the device switches off automatically.
8.3 Automatic switch-off
If you would like to fall asleep to the music of your iElements, the device can switch off after
a specified time. (sleep timer function)
If you would like to activate this function, press the menu button, use the << and >> buttons
to select the SLEEP menu item and confirm again with the menu button. The symbol ST
appears on the display. (sleep timer)
If the automatic switch-off function has already been set, the remaining time is displayed.
You can set the switch-off time in one-minute increments with the << and >> buttons. You
can set the switch-off time in 5 or 15 minute increments with the + and – buttons. Confirm
your selection with the menu button.
You can select 5 to 90 minutes. If you select OFF, the automatic switch-off function is
deactivated. Shortly before your iElements switches off, information on the remaining time is
shown on the display. One minute before the device switches off, your iElements slowly starts
to fade out the audio output.
8.4 Equaliser (Bass/Treble)
You can adjust the sound of your iElements to your personal taste or your surroundings.
You can adjust both the bass and treble to seven different levels.
When your iElements is switched on, press the menu button and then select the BASS or
TREBLE menu item with the << and >> buttons. Confirm your selection with the menu
button. Depending on the selected menu item, you can then change the bass or treble
setting of your iElements. You can select a value between - 3 and + 3 with the + and –
buttons. A positive value means that low or high frequencies are increased, depending on
whether you have selected BASS or TREBLE. A negative value indicates a decrease in the
corresponding frequencies.
20