Publicidad
Idiomas disponibles
Idiomas disponibles
Tuner
Listening to the radio
1
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on the next page.
This units AF (alternative frequencies search)
function can be turned on and off. AF should
be off for normal tuning operation (refer to
page 17).
1 Stereo (ST) indicator
Shows that the frequency selected is being
broadcast in stereo.
2 LOC indicator
Shows when local seek tuning is on.
3 Preset number indicator
Shows which preset has been selected.
4 Band indicator
Shows which band the radio is tuned to,
MW, LW or FM.
5 Frequency indicator
Shows to which frequency the tuner is
tuned.
1
Press SOURCE to select the tuner.
Press SOURCE until you see Tuner displayed.
2
Press BAND to select a band.
Press BAND until the desired band is dis-
played, FM1, FM2, FM3 for FM or MW/LW.
All manuals and user guides at all-guides.com
2
3
4
5
3
To perform manual tuning, briefly press
c or d.
The frequencies move up or down step by
step.
4
To perform seek tuning, press and hold
c or d for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
# You can cancel seek tuning by briefly pressing
either c or d.
# If you press and hold c or d you can skip sta-
tions. Seek tuning starts as soon as you release
the button.
Section
04
13
En
Publicidad
