Setting The Temperature - Dometic WAECO CoolFreeze CF-35 Instrucciones De Uso

_CF-35_60.book Seite 36 Montag, 19. Dezember 2011 8:26 20
Operation
Caution – Danger from excessively low temperature!
a
Ensure that the only those objects are placed in the cooler that are
intended to be cooled at the selected temperature.
➤ Press the "ON/OFF" button (fig. 3 1, page 3) for between one
and two seconds.
✓ The "POWER" LED lights up.
✓ The display (fig. 3 5, page 3) switches on and shows the
current cooling temperature.
Note
I
The temperature displayed is that of the middle of the interior.
The temperatures elsewhere can deviate from this temperature.
✓ The cooler starts cooling the interior.
Note
I
When operating with the battery, the display switches off auto-
matically if the battery voltage is low. The LED "POWER" flashes
orange.
Locking the cooler
CF-35, CF-40
➤ Close the lid.
➤ Press the lock (fig. 2 1, page 3) down, until it latches in
place audibly.
6.6

Setting the temperature

➤ Press the "SET" button (fig. 3 4, page 3) once.
➤ Use the "UP +" (fig. 3 6, page 3) and "DOWN -" (fig. 3 7,
page 3) buttons to select the cooling temperature.
✓ The cooling temperature appears in the display for a few
seconds. The display flashes several times and then the current
temperature is displayed again.
36