CAUTION
!
•
Do not use water on a grease fire. Personal
injury may result. If a grease fire develops,
turn knobs and LP cylinder off.
•
Do not leave grill unattended while
preheating or burning off food residue on
HI. If grill has not been regularly cleaned, a
grease fire can occur that may damage
the product.
Ignitor Lighting the Griddle
Do not lean over grill while lighting.
1. In order for the igniter switch to work,
please make sure the battery is properly
installed.
2.
OFF
Turn
gas burner control valves.
ON
3. Turn
gas at LP cylinder.
4. To ignite, push and turn the
!
BURNER
5. Push and hold
button until the
6. If ignition does
the burner controls
repeat the lighting procedure.
7. To ignite remaining burners, turn each
burner knob in sequence to the position,
starting with the burner closest to the
IGNITION BURNER
8. Once each burner has ignited, turn knobs to
desired setting.
9
IGNITION
MAX.
knob to
ELECTRONIC IGNITION
IGNITION BURNER
NOT
occur in 5 seconds, turn
OFF
, wait 5 minutes and
.
lights.