Publicidad
Idiomas disponibles
Idiomas disponibles
Changing the system language:
Display
6
Evaluation and Interpretation of the Results
In the following, you will find information on how to interpret the determined conductivity
values. Please keep in mind that this device only shows the conductivity of the object and
deduces from this value, which material it could be amongst others. Since the
GoldScreenSensor only measures the electrical conductivity, we recommend using a conductivity
value reference table (see annex) in case of doubt. However, the following factors can also falsify
the electrical conductivity:
24
Possible reasons for a failed calibration can be:
Temperature
environment too high or too low.
The calibration was started before an
object was tested in the measurement
mode.
Wrong coin/piece used.
Please note: The factory-made calibration of
the device is carried out at a temperature of
22 °C. Because the conductivity value as a
material-specific parameter depends on the
temperature, we recommend using the device
only at room temperature (22 °C (+/- 2 °C)).
Both the device and the test objects must have
the same temperature as the respective
environment.
Description
Please enter the "Language selection" by
selecting the option in the main menu and
pushing the knob. Now you can select the
desired
language.
automatically returned to the main menu.
of
the
measuring
You
will
then
be
Publicidad
