General Safety Instructions; Safety Instructions Regarding Installation; Technical Specification - Reer Neo 200 Manual De Uso

General safety instructions

Congratulations on the purchase of your new reer baby monitor. This intuitive unit's highly
sensitive microphone transmits the sounds your baby makes clearly and reliably. As soon as
your child is quiet, the device switches automatically into an „ECO mode". In this ECO mode,
the baby unit no longer emits any radiation. The baby unit's soothing night light helps your
child settle to sleep, and the unit then automatically switches to „ECO mode" as soon as
your baby is quiet. The baby unit starts to send again only when noises are received. Thanks
to optional battery operation for the parent unit and robust belt clip, the baby monitor is
handy for use as a stationary or mobile unit. We are sure you will enjoy the quality of our
product for many years to come.
Please take a few minutes to read through the safety instructions carefully. You will only
be able to use the reer baby monitor with confidence if all of the points mentioned here
have been checked. Please keep the instruction manual in a safe place for future reference.
! Check the unit for visible damage before each use. If you detect any damage, do not use
the unit.
! Only use the supplied chargers and mains adapters. Make sure that the operating voltage
of the power outlet matches that of the mains adapter. Check - especially when travelling
abroad - that the local mains voltage matches the voltage specified on the units and/or
mains adapters.
! Except for the battery compartment cover, never open the units or mains adapters, as
there is a risk of electric shock. If a unit does not work correctly, please do NOT try to fix
the problem yourself. Please contact your dealer with any problems.
! Keep the battery out of the reach of children. In order to avoid any risk of swallowing.
! Avoid bringing the battery and/or electrical connection contacts on the units into
contact with metal objects.
! This product is not a toy! Do not allow children to play with the unit.
NOTE: This baby monitor was designed exclusively for monitoring your baby. It may
neither be regarded as a substitute for parental supervision nor as a medical device.
12

Safety instructions regarding installation

! Always place the baby unit out of your child´s reach (minimum distance: 1 meter).
! Never place the baby monitor inside the crib, cot or playpen.
! The power lead must be secured out of the reach of children to avoid any risk of
strangulation. Do not use extension cables.
! To ensure optimal transmission, the units must be kept upright at all times and placed in
an elevated position.
! DO NOT place the receiver in the vicinity of radio transceivers or microwaves. Radiant
emissions from these devices can significantly affect radio reception.
! Do not use the units near water or in humid places. Do not submerge the units in water.
Do not rinse the units under running water.
! Do not cover the baby monitor with towels, clothes or blankets.
! Avoid extreme heat and direct sunlight.
• technology: Analogue
• transmitter: Power supply with mains
adaptor
• receiver: Power supply with mains
adaptor or optionally with 3 AAA
batteries or power pack (not included in
the scope of delivery)
• input: 100 – 220V 50Hz 0.15 A max.
• output: 6V / 300mA max.

Technical specification

• transmitter power: TX 50 mA , RX 130 mA
• frequency: 40 MHz
• range: 200 m
• cable length: approx. 1.80 m
• working temperature: 10°C - 40°C
• storage temperature: 0°C - 55°C
• standards: EN 300 220-1, EN 301 489-1
and EN 301 489-3
GB
13