geberit HS01 Manual De Operación página 40

Malfunction Cause
EN
Does not
flush.
Water runs
continuous-
ly.
1)
Flush actuations will no longer take place if the battery is almost dead.
Skilled persons will find further information
on troubleshooting in the maintenance
manual 970.124.00.0 on the website of the
respective Geberit sales company or via
the adjacent QR code.
Solenoid
valve or
control unit
defective
Battery dead
Pipe pressure
too low
Basket filter
clogged
Solenoid
valve or
control unit
defective
Rectification
▶
Contact a skilled
person.
▶
Replace the battery.
→ See Replacing
the battery.
▶
Contact a skilled
person.
▶
Contact a skilled
person.
▶
Close the water tap.
▶
Contact a skilled
person.