Flex VCE 22 M MC Instrucciones De Funcionamiento Originales página 21

VCE 22 M MC/VCE 22 M MC/VCE 26 H MC
2.3 Spare parts and accessories
CAUTION
Spare parts and accessories.
The use of non-genuine spare parts, brushes
and accessories can impair the safety and or
function of the appliance.
Only use original spare parts and accessories from
FLEX. Spare parts that can affect health and safety
of the operator and or function of the appliance, are
specified below:
Description
Filter element FE VC/E 21-26 - PET LM
Filter element FE VC/E 26 H HEPA 14
Fleece filter bag FS-F VC/E 21-26 L (VE 5)
Disposal bag ES PP VC/E 21-26 L (VE 5)
Suction hose Ø 27
Suction hose Ø 32
2.4 In explosive or inflammable atmosphere
CAUTION
This machine is not suitable for use in explo-
sive or inflammable atmospheres or where
such atmospheres are likely to be produced
by the presence of volatile liquid or inflamma-
ble gas or vapour.
3 Control / Operation
CAUTION
Damage due to unsuitable mains voltage.
The appliance can be damaged as a result of
being connected to an unsuitable mains voltage.
• Ensure that the voltage shown on the rat-
ing plate corresponds to the voltage of the
local mains power supply.
3.1 Starting and operating of the machine
Check that the electrical switch is switched off (in
position 0). Check that suitable filter are installed in
the machine.Then connect the suction hose into the
suction inlet at the machine by pushing the hose for-
ward until it fits firmly in place at the inlet. Then con-
nect the tubes with the hose handle, twist the tubes
in order to ensure that they are properly fitted. Attach
suitable nozzle to the tube. Choose nozzle depend-
ing on what type of material that is to be picked-up.
If used for dust extraction in connection
with dust producing tool then connect end of suction
hose with appropriate adapter. Connect the plug into
a proper electrical outlet. Put the electrical switch
into position I in order to start the motor.
CAUTION
Suction hose Ø 32
OEL=Occupational Exposure Limit,
1)
Original instruction
Order No.
The hose diameter and the setting for suction hose
385.085
diameter must be the same.
530.658
502.235
385.107
445.045
406.708
3.2
An appliance socket with earthing contact is integrat-
ed in the machine. An external power tool can be con-
nected there. The socket features permanent power
on , when the electrical switch is in position
*)
the machine can be used as an extension cord.
In position
and off by the power tool connected. Dirt is picked
up from the source of dust immediately. To comply
with regulations, only approved dust producing tools
should be connected.
Machines equipped with FLEX Bluetooth remote
can also be switched on and off by using the remote.
Please see user guide supplied together with the
remote.
The maximum power consumption of the connected
electrical appliance is stated in section "Specifications".
Before turning the switch to position
that the tool connected to the appliance socket is
switched off.
Optional accessories / Option depending on model
*)
Hose Ø 32, turn clockwise
Turn l: Activate the machine.
Turn : for AUTO on/off
Turn 0: Stop the machine.
Hose Ø 27, turn counterclockwise
Turn l: Activate the machine.
Turn : for AUTO on/off
Turn 0: Stop the machine.
ø 27
ø 32
Auto-On/Off socket outlet for power tools
CAUTION
Appliance socket
* )
The appliance socket is designed for electri-
cal auxiliary equipment; see technical data for
reference.
• Prior to plugging in an appliance, always
switch off the machine and the appliance
that is to be connected.
• Read the operating instructions to the ap-
pliance to be connected and observe the
safety notes contained in these.
the machine can be switched on
ø 27
ø 32
*)
, i.e.
ensure
21