JVC KW-NT50HDT Manual De Instrucciones página 75

Menu items
AV Input
Bluetooth Audio
2
Camera Input *
Reverse Signal Polarity *
Language
Time Format
2
Time Zone *
DST (Daylight Saving Time) *
Beep
Startup Message
Shutdown Message
Startup Screen
Restore Factory Default
1
* Not selectable when the input is selected as the source.
2
* The setting varies depending on the installation settings (☞ page 9).
Selectable settings
You can determine the use of the LINE IN and VIDEO IN jacks.
(☞ page 69)
AV: Select when connecting an AV component such as a camcorder.
Audio: Select when connecting an audio component such as a portable
audio player.
1
Off * : Select when no component is connected ("AV-IN" is not
selectable).
On: Activates "BT Audio" for source selection.
1
Off * : Deactivates "BT Audio" for source selection ("BT Audio" is not
selectable).
On, Off (☞ page 87)
2
Battery, GND (☞ page 9)
Select the language used for on-screen information and voice guidance.
English, Español, Français
12 Hours, 24 Hours
Select your residential area from one of the following time zones for
clock adjustment.
Hawaii (UTC–10:00), Alaska (UTC–09:00), Pacific (UTC–08:00),
Mountain (UTC–07:00), Central (UTC–06:00),
Eastern (UTC–05:00), Atlantic (UTC–04:00),
Newfoundland (UTC–03:30)
2
Activate this if your residential area is subject to DST.
Auto : Activates daylight saving time.
Off : Cancels.
Adjust the volume of the key-touch tone.
Off, 1 to 10; Initial 5
Edit the voice message at startup/shutdown of the unit.
• To edit the message, press [Edit], enter the message, then press [OK].
You can listen to the edited message by pressing [Test].
– For entering the characters, ☞ page 11.
Select the startup screen when the power is turned on.
Initialize all settings you have made. Press [Restore] to initialize the
settings.
• When restoring the settings, adjust the settings on installation setting
screen (☞ page 9).
75
AV menu items
Initial: Underlined