Descargar Imprimir esta página

Main Components - SOLAC ECOGENIC Instrucciones De Uso

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
• Do not sit on the appliance or stand in front of it, as this could cause material damage
to the appliance.
• Make sure that there are no wires, cables or other objects longer than 150 mm on the
floor, as they could entangle the rollers.
q
CAUTION! When you want to dispose of the appliance, NEVER throw it in the
rubbish bin. Take it to the CLEAN POINT or waste collection centre closest to your
home for processing. You will thus be helping to take care of the environment.

MAIN COMPONENTS

1
Main body
2
Remote control
3
Automatic charging station
4
Virtual barrier
5
Adaptor
6
Cleaning brush
7
Filter (two units)
8
Side brush (two units)
9
Mop
10
Mop accessory
11
Dustbin
12
Dustbin release button
13
Vacuum module release button
14
Filter tab
15
Vacuum module
PREPARING THE APPLIANCE CHARGING THE ROBOT
VACUUM
n
Only use the adaptor and charging station supplied. Do not use any others.
,
The charging time is approximately 5 hours for 60-90 min of operation. The first time
you charge the battery, leave it to charge overnight.
MAIN COMPONENTS OF CHARGING STATION (A)
1A Decorative LED
2A Decorative LED switch
3A Transmission signal
4A LED ON light
CHARGING USING THE CHARGING STATION (Fig. 1)
)
Do not place any objects near the charging station and ensure that the surrounding
area is free from items of furniture or obstacles (see recommended distances in the
diagram).
)
The robot will not find the charging station if there are obstacles. Place the charging
station in a clear, unobstructed area.
)
The robot will not find the charging station if the infrared signal transmitter (3A) is
covered.
1 Place the charging station on a clean floor and against a vertical wall.
2 Connect the adaptor (7A) to the charging station connector.
3 Plug the adaptor into the mains.
,
The LED ON light (4A) will light up red.
18
16
Infrared sensor
17
Handle
18
Front bumper
19
Battery adaptor connector
20
Operating switch
21
Control button panel
22
Rubber roller
23
Central roller
24
Side wheels
25
Collision sensors
26
Charging station contact
connectors
27
Stair detector sensors
28
Front wheel
29
UV lamp
5A Charge indicator
6A Contact connectors
7A Adaptor connector
MAIN COMPONENTS

Publicidad

loading