Approved Combinations Of Cutting Attachment, Deflector, Handle And Harness - Stihl FSA 90 R Manual De Instrucciones

English

Approved Combinations of Cutting Attachment, Deflector, Handle and Harness

Cutting Attachment Deflector
1
2
3
Approved Combinations
Select correct combination from the
table according to the cutting
attachment you intend to use.
WARNING
For safety reasons only the cutting
attachments, deflectors, handles and
harnesses shown in each row of the
table may be used together. No other
combinations are permitted – risk of
accidents.
Cutting Attachments
Mowing heads
1)
1 STIHL SuperCut 20-2
1)
2 STIHL AutoCut 25-2
1)
3 STIHL DuroCut 20-2
14
Handle
4
Deflectors
4 Deflector with line limiting blade
Handles
5 Loop handle
Shoulder Strap/Harness
6 Shoulder strap may be used
7 Full harness may be used
8 Harness for Type AR battery may
be used together with
9 padding (special accessory)
1)
Operate the mowing head only with
2.4 mm diameter (0.095 in) round,
quiet nylon line
Shoulder Strap/Harness
5
6
8
7
See chapter on "Fitting the Harness".
WARNING
Use only the provided deflector in order
to reduce the risk of injury from thrown
objects and contact with the cutting
attachment.
Make sure your unit is equipped with the
provided handle in order to reduce the
risk of injury from loss of control and
contact with the cutting attachment.
Do not use rigid polymer blades, metal
cutting attachments or circular saw
blades on this unit.
Only the listed mowing heads may be
used.
9
FSA 90 R