Dandy Simplicity SPAC8499 Manual Del Propietário página 35

Setting the AUTO-OFF TIMER
Before setting the AUTO-OFF timer, the time of
day clock must be set/operational.
1) To set the AUTO-OFF timer, the unit must be
turned on (I/O switch) and operational.
2) Press the TIMER-OFF key pad to initiate the
AUTO-OFF time sequence. Fig. 33. The display
window will indicate TIMER-OFF and the word
OFF will flash for 5 seconds. Press the
key pad to select the desired AUTO-OFF time.
Fig. 33a.
key pad will decrease the AUTO-TIMED
setting in 10 minute increments.
keypad will increase the AUTO-TIMED
setting in 10 minute increments.
When the desired time is established, (the time
will flash in the display window) press the
CLOCK key pad to register the AUTO TIMER-
OFF program. The word OFF will stop flashing
and remain "on" (TIMER OFF) indicating the
program is set. The time of day clock setting will
immediately revert back in the display window.
You can varify the AUTO-OFF time selection
anytime by pressing the TIMER-OFF key pad. The
time you selected will appear (flash) temporarily
(replacing the time of day) for approximately 5
seconds.
IMPORTANT: The desired AUTO-OFF time must
be registered within a 5 second period (after
pressing the TIMER-OFF key pad) otherwise the
selected time will not register and the system
will automatically revert back to the regular
"time of day" clock setting. If this occurs, you
must repeat step 2 again.
The unit will stop automatically when the specified
AUTO-OFF time is achieved on the time of day
clock. To cancel or override the AUTO-TIMED
program, simply turn off the unit manually, prior to
the scheduled AUTO-OFF time.
TIMER OFF
Water Full
or
Cool/Heat/Dry
TIMER OFF
Water Full
Cool/Heat/Dry
17
I/O
12:00
FAN
SWING
I/O
12:00
FAN
TIMER
SWING
MODE
TEMP./CLOCK
ADJ.
ON
TIMER
OFF
CLOCK
Fig. 33
MODE
TEMP./CLOCK
ADJ.
ON
OFF
CLOCK
Fig. 33a