Publicidad
Idiomas disponibles
Idiomas disponibles
SET UP & USE
13. Replace the top hinge cover and leveling feet. Adjust leveling feet
as necessary.
NOTE: If the top of the door is not aligned with the cabinet, loosen the top
hinge screws, adjust door and re-tighten the screws.
REVERSING THE DOOR HINGE
(MODEL CCB109GB & CCB138GB)
1.
Remove the top hinge cover.
2.
Using a Phillips Head Screwdriver, loosen and remove the 2 screws
holding the top hinge in place.
3.
Remove top hinge and carefully lift off the door.
4.
Remove the screw hole plugs from the opposite side of the Cabinet
and the Door and insert the plugs in the screw hole openings of the
just removed screws.
5.
Remove any loose items in the Beverage Cooler.
NOTE: Do not tilt the appliance over 45 degrees when reversing the
door as possible damage to the sealed system may occur.
6.
Remove Leveling Leg from underside of Cooler.
7.
Loosen the screws holding the lower hinge bracket to the Beverage
Cooler and remove screws and bracket.
Page 11
Publicidad
