Victron energy MPPT Serie Manual Del Usuario página 2

English - User Manual
1. SAFETY INSTRUCTIONS
1. This controller is suitable for 3 types of batteries, including lead-acidl batteries (12V/24V
auto), lithium-ion batteries(3 strings of 11.1V lithiuml batteries); lithium iron phosphate
batteries (4 strings of 12.8V) Dont used in Other battery.
Battery type description:
B1 is a lead-acid battery (12V/24V auto);
B2 is a lithium ion battery (3 strings of 11.1V lithium batteries);
lB3 is lithium iron phosphate battery (4 strings 12.8V)
2.The battery cable should be as short as possible to minimize loss.
3.When installation for the first time, set the battery type according to the type of battery and
make sure that the battery has enough voltagel so that the controller can recognize the correct
battery type.
4.The charge regulator is only suitable for regulating solar modules.
Never connect another charging source to the charge regulator.
2. PRODUCT FEATURES
1.Build-in industrial micro controller.
2.Large-screen LCD display, charging and discharging current display, cumulative power
generation and discharge power query, temperature display, light control+ delay control;
adjustable charge and discharge parameters, with power-off memory and other functions.
3.Dual USB output, the maximum current of 2.5A, to support Apple's mobile phone charging.
4.Fully 3-stage charge management.
5.Build-in short-circuit protection,open-circuit protection,reverse protection,over-load
protection.
6. Reverse current protection,low heat production.
3. SYSTEM CONNECTION
1.connect the battery to the charge regulator-plus and minus.
2.Connect the photovoltaic module to the regulator-plus and minus.
3.Connect the consumer to the charge regulator-plus and minus.
The reverse order applies when deinstalling!
An improper sequence order can damage the controller!
2