Descargar Imprimir esta página

Vitrifrigo OCX IM XT Manual De Instrucciones página 20

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

6. ELECTRICAL CONNECTIONS
ATTENTION
This machine must be earthed in accordance with the laws in force. Make
sure that the electrical system earthing installation is in perfect working order. The
manufacturer hereby refuses to accept any liability for damages to people or property
arising from the failure to respect this regulation.
Before connecting the machine, make sure that the mains voltage corresponds to
that given on the machine or compressor rating plates.
The use of adapters, multiple sockets, or extension leads is not recommended.
Should it be necessary to use one of the latter, always use materials that conform
to the safety standards in force and take care not to exceed the current capacity
limits stated on the materials themselves.
In the event that the ice maker plug is not compatible with the socket, it is preferable to
replace the socket with another, more suitable type.
A qualified technician, who must ensure that the socket wiring is suitable for the electrical
input of the machine, should carry out this operation.
7. OPERATION
After it has been installed, the Ice Maker will run an empty cycle and then produce ice
during all subsequent cycles. The first cubes will be dispensed after approximately
1 hour.
Starting "REFILL" model
Open the door, remove the ice tray and pour drinking water into the tank through
the filler, checking the water level through the relevant window. This operation should be
carried out slowly in order to avoid any water overflow. Plug the machine into the power
socket and switch on the main switch.
ATTENTION
The tank should be filled with drinking water only.
Starting "HYDRO" model
Connect the water mains to the threaded filler on the solenoid valve using
the special hose supplied.
The machine is equipped to operate at a water pressure of between 1 and 3 bar.
Make sure that the water mains supply drinking water and that the pressure of the water
is sufficient to produce between 120 – 135 g of ice per cycle (the optimum pressure is 2
bar).
ENG
20

Publicidad

loading

Este manual también es adecuado para:

Ocx im cl