Assemble The Hybrid System; Attach The Hybrid Receiver - Cochlear Hybrid Guia

Assemble the Hybrid system

Follow the steps below to convert a Nucleus 8 Sound Processor or a Nucleus 7 Sound
Processor to Hybrid mode by attaching a Hybrid receiver.

Attach the Hybrid receiver

Note
This procedure is intended to be performed by clinicians only.
1. Pull up on the normal earhook to remove
it.
2. Insert the Cochlear EAC200 Series
Screwdriver into the hole in the
processing unit plug.
Note
Keep the plug in case the recipient
later wants to use their sound
processor without the Hybrid system.
3. Use the screwdriver to carefully remove
the plug.
8 Hybrid Mode Professionals Guide