Publicidad
Idiomas disponibles
Idiomas disponibles
Operating Instructions
5.2.3
Operating state
DIP switch 4 can be used to switch between the two operating states AUTOMATIC (AUTO) and MANUAL (MANU).
ON DIP
1 2 3 4
ON DIP
1 2 3 4
5.2.4
Function of the buttons
NOTE!
The assignment of the 2 buttons differs depending on the operating state (AUTOMATIC/MANUAL).
Operating state MANUAL (Slide DIP switch 4 ON)
LED1
LED2
ON DIP
1 2 3 4
S1/X-TUNE
S2
LED1
LED2
ON DIP
1 2 3 4
S1/X-TUNE
S2
LED1
LED2
ON DIP
1 2 3 4
S1/X-TUNE
S2
* Depending on the mode of operation of the actuator.
Button 4
Function
ON
In MANUAL operating state, the valve can be opened or closed manually using the
buttons.
OFF
In the AUTOMATIC (AUTO) operating state, normal controller operation is perfor-
med and monitored.
Button
Function
1
Aerate (manually open or close the actuator)*
2
Ventilate (manually open or close the actuator)*
1 and 2
Longer than 10 s (< 30 s, LED 2 flashes at 5 Hz): Device restart
Longer than 30 s (LED 2 flashes at 10 Hz): Reset the device to factory settings
Type SPC positioner
25
Publicidad
