Snapper S22675 Manual Del Operador página 10

Assembly
Attaching the Side Mounted Discharge Deflector
WARNING: To prevent the engine from starting,
disconnect the wire from the spark plug.
For shipping purposes, the side deflector was not installed.
Locate the side deflector and install as follows.
1. Raise the mulcher cover (A, Figure 8).
2. Slide the two tabs (B) on the side deflector (C) under
the pivot pin.
3. Lower the side deflector. Make sure the locking tab (A,
Figure 9) goes through the slot in the side deflector.
4. Lower the mulcher cover (A, Figure 10).
5. Attach the wire to the spark plug.
C
Figure 8: Installing the side discharge deflector
10
All manuals and user guides at all-guides.com
A
B
A
Figure 9: Side discharge deflector locking tabs
A
Figure 10: Releasing the mulcher cover
www.snapper.com