Publicidad
Idiomas disponibles
Idiomas disponibles
ELDA - CORONA
1.4
DATAPLATE
The dataplate is visible on the pellet hopper door or on the back of the unit. It gives the unit technical data, including
the model, serial number, CE marking, test laboratory and the reference test report.
1.5
GENERAL INFORMATION
All rights reserved. No part of this instruction manual may be reproduced or transmitted by any electronic or
mechanical means, including photocopying, recording or any other storage and experiment system, for any purpose
other than the purchaser's personal use only, without the Manufacturer's express written permission.
The company reserves the right to make changes to the product at any time without notice.
The Manufacturer is in no way liable for the consequences of incorrect operations carried out by the user.
1.6
GENERAL CONSIDERATIONS
All operating and maintenance instructions and recommendations described in this manual must be respected. For
best results, the Manufacturer recommends performing cleaning and maintenance operations regularly to keep the
equipment in best condition.
The Manufacturer guarantees its products in accordance with the regulations currently in force, with the exception
of parts subject to normal wear. For the warranty conditions, contact the importer or the authorized representative,
who can supplement the mandatory warranty period with an additional period at his sole responsibility. The product
warranty is voided for any problem, breakage or accident due to failure to comply with or apply the instructions
contained in this manual.
This manual, the technical data sheet or layout and the various declarations (DoC, DoP, etc.) are available
on the company website or by requesting them from the local Dealer.
The Manufacturer thanks you for the trust placed in us by purchasing one of our products.
2.
GENERAL INFORMATION
2.1
RECIPIENTS
This manual is intended for the user of the heating system and is an integral part of the product. The unit is a
heat generator fueled exclusively with wood pellets in automatic operation, designed to heat the room by radiation
and convection generated by combustion. It must be installed inside residential premises sized according to its
performance and heating capacity.
2.2
SUPPLY AND KEEPING
The manual is supplied in paper format.
Check that it always stays with the unit and in case of sale, transfer to another owner or installed in another place,
make sure it is present so that it can be consulted at any time.
It must be kept intact in all its parts and in case of loss or damage, request a copy from the authorized Technical
Support Center or download it from the company website.
It must also stay with the unit until scrapping, even in the event of moving, sale, renting or other.
2.3
PURPOSE AND CONTENT OF THE MANUAL
The purpose of the manual is to provide fundamental and basic information for correct installation, maintenance and
use of the product. Strict observance of the instructions provided ensures a high level of safety and functionality
of the unit.
EN
A73023860 - Rev 01 - 06/2023
165
Publicidad
