Ferroli ELDA Serie Instrucciones De Uso, Instalación Y Mantenimiento página 204

8. CLEANING
8.1 GENERAL INSTRUCTIONS
Cleaning the unit is very important to prevent: poor combustion, deposits of ash
and unburnt products in the brazier, as well as reduced heating efficiency.
Cleaning operations for all parts must be carried out with the unit electrically
disconnected and completely cold.
Clean the brazier regularly every time the unit is lit and/or whenever reloading
pellets.
Dispose of cleaning waste, respecting the applicable local regulations.
8.2 MAINTENANCE TABLE
The following summarizes the control and/or maintenance interventions useful for correct use and operation of the
unit, to be carried out by the USER and/or by an AUTHORIZED SERVICE CENTER.
Parts / Period
Type of cleaning
Brazier
Ash-pan compartment
Glass
Fume exchanger - baffle
Fume extractor - manifold
Glass - door seal
Pellet door seal
Safety valve
Pipe – flue connection
Electromechanical components
The seals of the pellet door, safety valve (present in the hermetic version), fire
door, air intake manifold and the fume exhaust ensure correct operation of the
unit. These components must be periodically checked by the user, if worn or
damaged they must be replaced immediately by an authorized service center.
204
1 day 2-3 days 1 month
user user user
cleaning cleaning cleaning
■
■
■
■
A73023860 - Rev 01 - 06/2023
ELDA - CORONA
2 - 3 months
Maintenance performed by the
Technical Support Center
■
1 year
Maintenance performed
by the Technical Support
Center
■
■
■
■
■
■
■
EN