Publicidad
Idiomas disponibles
Idiomas disponibles
TERMOENCOLADO SALKI
EN
SAFETY INSTRUCTIONS
Read the entire manual before attempting to operate the glue gun. Save this manual.
1. Keep work area clean.
2. Consider work area environment.
Never expose power tools to rain. Do not use power tools in damp or wet locations. Keep work area well lit.
Don't use power tools near flammable liquids or gasoline.
3. Guard against electric shock.
4. Keep children away from power tools.
Do not let anyone contact the tool or the power cord. Keep all visitors out of the work area. This appliance may
be used by children aged 8 and above and persons with reduced physical, sensory or mental capacities or
lack of experience and knowledge if they have been given appropriate supervision or instruction regarding the
use of the appliance in a manner Safe and understand the dangers involved. Children should not play with the
appliance. The cleaning and maintenance of the device to be carried out by the user must not be carried out
by the children without supervision.
5. Store idle tools.
When not in use, tools should be stored in a dry, out of reach, or locked location, away from children.
6. Do not force tool.
It will operate move efficiently and safer at the normal rate it was designed for.
7. Use right tool.
Don't force small tools to do heavy jobs. Operate tools for intended use only.
8. Dress Properly.
Do not wear loose clothing or jewelry. They may become caught in moving parts. Rubber gloves and non-skid
footwear are recommended when working outdoors. Wear a protective hair covering to contain long hair.
9. Use proper safety glasses.
If necessary, use a face shield or dust mask.
10. Don't abuse cord.
Never carry the tool by the cord or yank it out of a power receptacle. Keep cord away from heat, all liquids, and
sharp edges.
11. Do not force your working position.
Keep proper footing and balance at all times.
12. Maintain tools with care.
For safety and performance, keep tools clean and sharp. Follow regular maintenance procedures. Inspect tool
cords and extension cords periodically. If damaged, use a certified service technician to repair. Keep handle
dry, clean, and free from grease or oil.
13. Disconnect tools.
Disconnect when not in use, servicing, or performing maintenance.
14. Avoid unintentional starting.
Never carry a plugged in tool with your finger on the switch. Turn switch off before plugging it in.
15. Extension cords.
Use only approved extension cords suitable for the input power of the machine.
16. Stay alert.
Use common sense. Pay attention to your work. Do not operate tool when overtired.
17. Check for damaged parts.
Before using, check the tool for damaged parts to insure safe operation. Check alignment of moving parts, for
broken parts, binding of moving parts, proper mounting, and any conditions that might affect safe operation.
Any guard or part that is damaged should be replaced or repaired by a authorized service technician. Do
not use the tool if switch does not turn on or off properly. Have defective switches replaced by an authorized
service technician.
18. Warning.
Use of any accessory or attachment other than those recommended in this manual may present the risk of
personal injury.
19. Authorized service technician repairs only.
This electric power tool is must only be repaired by an authorized service center. Do not repair yourself or you
15
Publicidad
