HQ-Power PROCD1000 Manual Del Usuario página 2

3. General Guidelines
• The PROCD1000 should only be used indoors with an alternating current of max. 230V AC/50Hz.
• Do not shake the device. Avoid brute force when installing or operating the device.
• Select a location where the device is protected against extreme heat, dust and moisture.
• Install the device in a well-ventilated area. Keep a minimum distance of 30cm around the device.
• Do not expose the device to direct sunlight.
• Keep the device away from sources of hum such as transformers or motors.
• Familiarise yourself with the functions of the device before actually using it. Do not allow operation by unqualified
people. Any damage that may occur will most probably be due to unprofessional use of the device.
• Clean your hands before handling discs. Do not insert damaged discs into the device.
• Disconnect the power cord and all connecting cables before moving the device.
• Do not forget to close the disc tray to keep the laser pickup clean.
• Use the original packaging if the device is to be transported.
• All modifications of the device are forbidden for safety reasons.
• Only use the device for its intended purpose. All other uses may lead to short circuits, burns, electroshocks,
crash, etc. Using the device in an unauthorised way will void the warranty.
4. Description
1. POWER SWITCH
Press the power switch to turn the unit on and to switch it off.
2. DISC TRAY
The disc is placed in the tray and the CD will be loaded when the OPEN / CLOSE (3) button is pressed.
3. OPEN / CLOSE
Press to load or eject the disc.
4. LCD
The liquid crystal display (LCD) indicates the track number, time (in minutes, seconds, frames), remaining time,
pitch, loop, auto cue single, continue and time bar.
5. PLAY / PAUSE
Press the PLAY / PAUSE button to pause the disc. Press the button again to continue playing.
6. PLAY / PAUSE indicator
7. STOP button
8. TRACK (skip button)
Select the track to be played.
9. SEARCHING
Use these buttons to accurately change the starting position of the disc.
10. TIME
Press this button to switch between elapsed playing time, single remaining time and total remaining time and to
switch off the OUTRO function. When OUTRO appears on the display, only the last 30 seconds of each track will
be played.
11. PITCH button
Press this button to switch to PITCH ON mode. Select the 16% button to assign +/- 16% to the pitch control slider.
When the unit is in PITCH OFF mode, the playback speed is normal (0%). The playback speed will not change
when you move the pitch control slider.
PROCD1000 2 VELLEMAN