HQ-Power PROCD1000 Manual Del Usuario página 3

12. PITCH CONTROL slider
To match the playback speed (16%), choose the desired range between maximum (up) and the minimum (down)
by moving the pitch control slider.
13. PITCH BEND +/- button
Match the position of the bass beat after the pitch has been adjusted. The pitch will automatically rise to +16%
from the current setting by pressing the + button. By pressing the – button, the pitch will automatically drop to -
16% from the current setting. By changing the pitch you can match the position of the beats.
14. CUE
The cue function allows the disc to be played from a memorized point any given number of times. When the unit
is in pause mode, press the CUE button to set up the memorized cue point. The CUE button will blink.
15. LOOP
After having selected the cue point, press the LOOP button to play the disc from the cue point. The display will
show LOOP. The point at which the LOOP button was pressed is set as the end point of the loop. When the loop
is active and the disc is paused, press the CUE button to change the loop cue point without deleting the end point.
16. CONT. / SINGLE
Press this button to switch between the SINGLE and CONTINUOUS play mode. In SINGLE mode, after each
track, the unit auto cues where the song starts. It means that, without memorizing a cue point, pressing the CUE
button will return to the beginning of the song and play from there.
17. AUTO CUE
When in SINGLE mode, the music will start from an audible point.
5. Connections
1) Line out jack (to amplifier)
2) AC power cable
3) Digital output (to D/A amplifier)
6. How to use the CUE (with play /
pause)
1. In PAUSE mode, press the CUE button to memorize a point for playing back. This point is called CUE POINT.
2. In PLAY mode, press the CUE button to return the music back to the CUE POINT and keep it in the PAUSE
mode.
3. Press the PLAY button again to perform from the CUE POINT.
7. Cleaning and Maintenance
1. All screws should be tightened and free of corrosion.
2. The housing, visible parts, mounting supports and the installation location (e.g. ceiling, suspension, trussing)
should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting supports, do not
change the location of the connections, ...
3. The electric power supply cables must not show any damage. Have a qualified technician maintain the device.
4. Disconnect the device from the mains prior to maintenance activities.
5. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
6. There are no user-serviceable parts.
7. Contact your dealer for spare parts if necessary.
PROCD1000 3 VELLEMAN