EN
DISPLAY
Controls
• To start the dehydrator, press
dehydrator, press START/STOP.
TEMP/TIME
• Press
TEMP/TIME
• Press
BEFORE FIRST USE
Setting Up
1. Remove all packaging from the dehydrator and its accessories. Make sure all package
contents are included (see page 2).
2. Clean the housing, trays, and tray liners with a moistened cloth.
Note: The trays are dishwasher safe. Do not wash the mesh screen or fruit roll sheet in a dishwasher.
3. Place the dehydrator on a solid, level surface. Plug in. Place the trays inside the dehydrator.
4. Run the dehydrator for 30 minutes at 75 °C, without adding any food. Make sure that the
room has sufficient ventilation in case the dehydrator produces any smoke or smells. This is
normal.
5. Rinse the trays with water. Dry all parts.
Note: You only need to do this the first time you use the dehydrator.
12
Hours
TEMP/TIME
+
once and use the
and
a second time and use the
Minutes
once, then press START/STOP. To stop the
–
buttons to change the temperature.
+
–
and
buttons to change the time.