Gaggenau 200 Serie Instrucciones De Uso Y Montaje página 11

Area Cleaning agent
Stainless steel Hot soapy water:
Clean with a dishcloth and then dry with
a soft cloth.
Clean stainless steel surfaces in the
grind direction only.
Special stainless steel cleaning prod-
ucts are available from customer ser-
vice or from specialist retailers. Apply a
very thin layer of the cleaning product
with a soft cloth.
Painted surfaces Hot soapy water:
Clean using a damp dishcloth and dry
with a soft cloth/towel.
Do not use any stainless steel cleaners.
Aluminum and Glass cleaner:
plastic Clean with a soft cloth.
Glass Glass cleaner:
Clean with a soft cloth. Do not use a
glass scraper.
Operating Hot soapy water:
controls Clean using a damp dishcloth and dry
with a soft cloth/towel.
Risk of electric shock from penetrating
moisture.
Risk of damage to the electronics from
penetrating moisture. Never clean
operating controls with a wet cloth.
Do not use any stainless steel cleaners.
Cleaning the metal grease filter
These instructions apply to several appliance
models. It is possible that individual features are
described that do not apply to your appliance.
9
WARNING
Risk of fire
Grease deposits in the grease filter can ignite.
Clean the grease filter at least every two
months.
Never operate the appliance without the
grease filter.
Notes
‒ Do not use any aggressive, acidic or alkaline
cleaning agents.
‒ When cleaning the metal grease filters, also
clean the metal grease filter holder in the
appliance with a moist cloth.
‒ You can clean the metal grease filters in a
dishwasher or by hand.
By hand:
Note: You can use a special grease solvent if soiling
is stubborn. You can order it via the online shop.
▯
Soak the metal grease filters in hot soapy
solution.
▯
Use a brush for cleaning and then rinse the
filters well.
▯
Allow the metal grease filters to drip dry.
In the dishwasher:
Note: Slight discoloration is possible when cleaning
the grease filters in the dishwasher. This does not
affect the metal grease filter's functioning.
▯
Do not clean extremely dirty metal grease filters
with dishes.
▯
Loosely position the metal grease filter in the
dishwasher. The metal grease filters must not be
jammed in.
Uninstalling metal grease filter
1 Take metal mesh grease filter out of the holder.
2 Pull the metal grease filter downwards. While
doing this, place your other hand under the
metal grease filter.
Notes
‒ Grease can accumulate in the bottom of the
metal mesh grease filter.
‒ Do not hold metal mesh grease filter at an
angle, otherwise grease will drip out.
3 Clean the metal mesh grease filter.
Installing metal grease filter
1 Insert metal grease filter.
Simultaneously use your other hand to grasp
under the metal grease filter.
2 Flip metal grease filter up and snap the latch
into place.
11