Cameo CLDS60 Manual De Usuario página 16

Set the value or status with  or , or by turning the encoder, confirm with ✔ or by pressing
the encoder. Back with  or BACK.
CONFIGURE DMX START ADDRESS
Select DMX Address, confirm the selection, set the desired DMX address and confirm the input.
SELECT DMX MODE
Select DMX Mode, confirm the selection, then select the desired DMX mode and confirm the
selection.
STAND-ALONE DIRECT LED MODE
The stand-alone Direct LED mode allows dimmer and RGBW to be set directly on the unit with
values from 0 to 255, similar to a DMX controller. In this way, an individual scene can be created
without an additional DMX controller.
Select Stand Alone, confirm the selection, then select Direct LED and confirm again. Now select
the menu item you wish to edit and confirm the selection. Set the desired value in the selected
menu item and confirm the entry.
16