Cameo CLDS60 Manual De Usuario página 20

Dimmer Curve = Dimmer Curve
Dimmer
=
Response
PWM
=
Frequency
Colour
=
Calibration
Signal Fail =
Power Mode = Operating mode
SYSTEM INFORMATION (System Info)
Select System Info and confirm the selection.
This will take you to the submenu for accessing the system information (see table):
20
S-curve
LED
Dimmer
Response
Halogen
650Hz /
1530Hz /
Configuration of 3600Hz /
PWM frequency 12000Hz /
18900Hz /
25000Hz
RAW
Factory
Colour
User
Calibration
User Data
Hold
Last Stand
Alone
Operating status
when DMX signal Fade to Black
is interrupted (10s)
Blackout
Full
Constant
Maximum
Light intensity can be finely adjusted
at lower and higher DMX values and
broadly adjusted at medium DMX
values
Light responds abruptly to changes in
DMX value
Light behaves like a halogen spotlight
with slight brightness changes
R, G, B and W with maximum value 255
Factory calibration of R, G, B and W
(across all modes)
Enable User Calibration
Set individual colour calibration. Cross-
mode brightness setting of R, G, B, A
and L with values from 000 - 255.
Last command is retained
Activates the last selected Stand Alone
operating mode
10 seconds Fade Out
Activates blackout
All LEDs 100% output
Constant brightness over long periods
Maximum brightness