Dentsply Maillefer propex-pixi Manual De Usuario página 41

Guidance and manufacturer's declaration - electromagnetic emissions
The Product is intended for use in the electromagnetic environment specified below.
The customer or the user of the Product should assure that it is used in such an
environment.
Immunity
tests
IFY-ISR / F1902128.ES / 11 / 2011 - updated 02/2016
IEC 60601
Test level
Note
At 80 MHz and 800 MHz, the higher frequency range applies.
Note
These guidelines may not apply in all situations.
Electromagnetic propagation is affected by absorption and
reflection from structures, objects and people.
Electromagnetic environment
Compliance
level
Where P is the maximum
output power rating in the
transmitter in watts (W)
according to the transmitter
manufacturer and d is the
recommended separation
distance in metres (m). 
Field strengths from fixed RF
transmitters, as determined by
an electromagnetic site survey
a, should be less than the
compliance level in each
frequency range b. 
Interference may occur in the
vicinity of equipment marked
with the following symbol:
-
guidance
41/44