Dentsply Maillefer propex-pixi Manual De Usuario página 42

Guidance and manufacturer's declaration - electromagnetic emissions
The Product is intended for use in the electromagnetic environment specified below.
The customer or the user of the Product should assure that it is used in such an
environment.
Electromagnetic environment
Immunity IEC 60601 Compliance
-
tests Test level level
guidance
a 
Fixed strengths from fixed transmitters, such as base stations for radio (cellular/
cordless) telephones and land mobile radios, amateur radio, AM and FM radio
broadcast and TV broadcast cannot be predicted theoretically with accuracy. To
access the electromagnetic environment due to fixed RF transmitters, and
electromagnetic site survey should be considered. If the measured field strength in the
location in which the Product is used exceeds the applicable RF compliance level
above, the Product should b observed to verify normal operation. If abnormal
performance is observed, additional measures may be necessary, such as reorienting
or relocating the Product.
b 
Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3 V/
m.
42/44
IFY-ISR / F1902128.ES / 11 / 2011 - updated 02/2016